AZojomo - Journal of Materials Online

Journal Papers - AZojomo (ISSN 1833-122X) Date Added DOI Author Names
2010
Synthesis of BaTiO3 and Evaluation of Optical Properties 27/12/2010 10.2240/azojomo0306 R.Vijayalakshmi and V. Rajendran
Hydrogen Oxidation Activity and Co-Tolerance of Pt-Ni Alloy Nanoparticles Prepared on Ni Substrate 27/12/2010 10.2240/azojomo0305 Eiji Higuchi, Masahiro Ieguchi and Hiroshi Inoue
Influence of Surfactants on the Synthesis of TiO2 Nanoparticles 27/12/2010 10.2240/azojomo0304 R.Vijayalakshmi and K.V. Rajendran
Surface Modification of Diamond Powder Through Dissolution of CO2 in Water 27/12/2010 10.2240/azojomo0303 Heidy Visbal, Chanel Ishizaki and Kozo Ishizaki
A Novel Approach to Synthesize Carbon Nanotubes, Carbon Nanocoils, Carbon Microcoils on the Surface of Metallic Wire: Application in Vacuum Electronic Devices 23/12/2010 10.2240/azojomo0302 Sanjay Agarwal, B. Yamini Sarada and Kamal K. Kar
Mechanical Properties of Goat Leather Photo Grafted with Acrylate-Epoxidized Soybean Oil 23/12/2010 10.2240/azojomo0301 E.Vigueras-Santiago, S. Hernández-López, I. Linares-Hernández and K Linares-Hernández
A New Mechmism of Grinding Wheel Loading Phenomenon Evaluated by Machining a Magnesium Alloy 23/12/2010 10.2240/azojomo0300 NGUYEN Tien Dong, Koji MATSUMARU, Masakazu TAKATSU and Kozo ISHIZAKI
Photoluminescence Studies of Epitaxial ZnO Thin Films on Si (100) Substrates by Pulsed Laser Deposition 22/11/2010 10.2240/azojomo0287 Ashok Kumar, Sathyaharish Jeedigunta, I. Tarasov and S. Ostapenko
Sintering of Silicon Nitride Nano-Powders Prepared by High-Energy Mechanical Milling 22/11/2010 10.2240/azojomo0286 Toshiyuki Nishimura, Xin Xu, Naoto Hirosaki, Yoshinobu Yamamoto and Hidehiko Tanaka
Design-Synthesis-Evaluation of CrN-Based Nanocomposite Hard Coating 19/11/2010 10.2240/azojomo0285 Kwang Ho Kim, Se-Hun Kwon and Ji Hwan Yun
Abrasive Grain Efficiency and Surface Roughness for Machining Ceramics by Newly Developed Cup-Type Diamond-Grinding-Wheels 19/11/2010 10.2240/azojomo0284 TienDong Nguyen, Koji Matsumaru, Masakazu Takatsu and Kozo Ishizaki
High Young’s Modulus With High Damping Capacity of Porous Alumina 19/11/2010 10.2240/azojomo0283 Tetsu Takahashi, Koji Matsumaru and Kozo Ishizaki
Fabrication of Chemical Mechanical Polishing (CMP) Pad Dresser by Using Chemical Reaction Between Diamond Abrasive Grains and Titanium Matrix 19/11/2010 10.2240/azojomo0282 J.P. Wiff, Y. Takatsuru and K. Matsumaru
Preparation of Stacked Polypyrrole-Coated Non-Woven Fabrics for an Electromagnetic Wave-Absorbing Sheet 9/11/2010 10.2240/azojomo0299 Yoshihiro Egami,Takashi Yamamoto, Kunio Suzuki, Tadashi Yasuhara and Hiroshi Inoue
Effect of K+ Doping on the Phase Transformation of TiO2 Nanoparticles 9/11/2010 10.2240/azojomo0298 R.Vijayalakshmi and K. V. Rajendran
Transparent Cr-Doped Al2O3 Made by Pulsed Electric Current Sintering Process 9/11/2010 10.2240/azojomo0297 Khanh Quoc Dang and Makoto Nanko
Influences of Cr Addition on Internal Oxidation of Ni(Al) Solid Solution 9/11/2010 10.2240/azojomo0296 Makoto Nanko and Katsumi Uemura
Synthesis and Characterization of Ru Doped TiO2 Nanoparticles by A Sol-Gel and A Hydrothermal Process 9/11/2010 10.2240/azojomo0295 Hyun-Ju Kim, Sung Bin Bae and Dong- Sik Bae
Influence of Deposition Temperature on Titania Films Deposited by Ultrasonic Spray Pyrolysis 9/11/2010 10.2240/azojomo0294 A. Nakaruk, D. S. Perera and C. C. Sorrell

Sponsored Content

Editorial Highlights

The Current State of the Global Semiconductor Market

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.